Distribution supplies & protection
Provision, alteration and verification of agreed circuit supplies, protective devices, isolation and local electrical distribution.
Connected Electrical Systems
Electrical System Integration
Physical and hardwired electrical integration across commercial building systems, control panels and field devices.
ElectroLogic supports the electrical path between distribution, panels, equipment and agreed interfaces: supplies, containment, cabling, terminals, relays, signals, devices and functional verification. Software programming, network engineering, protocol configuration and specialist commissioning remain with the appropriate provider.
Connected electrical infrastructure
Integration works when every physical path is understood.
Building systems often need reliable hardwired connections between electrical distribution, control panels, field devices and specialist platforms. A missing supply, incorrect terminal, failed relay, unproven signal or unclear interface can prevent an otherwise sound system from operating together.
ElectroLogic delivers practical electrical integration within the confirmed scope, coordinating with BMS, PLC, lighting-controls, fire-alarm, access-control, mechanical and technology specialists where their work is required.
“Prove each electrical interface before assuming a software or specialist-system fault.”
Technical capabilities
Electrical support across the connected systems path.
Containment & cable routes
Practical containment, cable routing, segregation and accessible installation routes for power, control and interface wiring.
Control-panel interconnections
Hardwired connections between panels, relays, terminals, supplies and associated field circuits.
Relays, contactors & interface components
Installation, replacement and electrical verification of relays, contactors, interposing components and associated terminals.
BMS interfaces
Agreed hardwired BMS connections, field wiring and physical input/output interface checks.
PLC-controlled equipment
Electrical support around panel I/O, interlocks, outputs and field connections without PLC software programming.
DALI lighting interfaces
Electrical supplies, hardwired interfaces, DALI infrastructure connections and practical lighting-control interface checks.
Ventilation & mechanical-control interfaces
Agreed enables, interlocks, starter or drive connections, sensors and hardwired plant-control circuits.
Monitoring devices & metering
Electrical installation of meters, CTs, sensors, power supplies, pulse outputs and hardwired monitoring connections.
Fire-alarm & access-control interfaces
Agreed physical electrical interfaces, relays, supplies and signal wiring. Specialist system design, cause-and-effect configuration and programming remain outside scope.
Field devices & signals
Installation, termination, identification and electrical verification of sensors, actuators, switches, contacts and related devices.
Functional testing & evidence-led handover
Controlled interface and operating-sequence checks, records of completed work, confirmed findings and clear specialist follow-on actions.
Interface fault diagnosis
Find where the agreed electrical interface stops.
Diagnosis follows the hardwired path from distribution supply through containment, cabling, panels, terminals, relays, signals and field devices to the intended system response. Testing is selected for the circuit and connected equipment without testing through connected electronic devices.
Establish the hardwired condition before escalating configuration or specialist-system work.
Loss of circuit supply
Protective-device operation
Damaged or unidentified cabling
Loose or incorrect termination
Relay or contactor condition
Missing control signal
Field-device condition
Unproven interface
Configuration or programming requirement
Specialist system design requirement
- 1
Supply & protection
Verify the relevant electrical source, protection, isolation and intended supply path.
- 2
Containment & cabling
Trace the agreed cable route, segregation, identification, terminations and wiring integrity, using testing appropriate to the circuit and connected equipment.
- 3
Panels, terminals & relays
Check terminals, relay operation, interposing devices, hardwired control logic and panel connections.
- 4
Signals & field devices
Verify agreed inputs, outputs, contacts, sensors, actuators and interface signals.
- 5
Functional interface & handover
Confirm the electrical result, capture evidence and identify programming, configuration or specialist actions.
Electrical integration infrastructure
Electrical infrastructure that allows connected systems to work together.
Electrical support is focused on the physical and hardwired layer between distribution, panels, connected systems and field devices within the agreed scope.
Electrical distribution
- Supplies
- Protection
- Isolation
- Containment
- Cable routes
Control panels
- Terminals
- Relays
- Contactors
- Interlocks
- Power supplies
- Control wiring
Connected systems
- Agreed BMS interfaces
- PLC-controlled equipment
- DALI lighting
- Ventilation
- Monitoring
- Fire-alarm and access-control interfaces
Field layer
- Sensors
- Actuators
- Switches
- Meters
- CTs
- Contacts
- Drives
- Connected equipment
Operational integration environments
Controlled integration work around live commercial systems.
Planned isolation & reinstatement
Safe work planning around occupied buildings and operational services.
Interface coordination
Clear agreement of responsibilities with FM teams and relevant system specialists.
Staged verification
Area-by-area testing to limit disruption and identify dependencies.
Evidence-led records
Clear records of wiring changes, test results, outstanding configuration and handover actions.
Electrical integration boundary
Confirm the electrical interface, then coordinate specialist work.
ElectroLogic verifies agreed supplies, containment, cabling, terminals, relays, hardwired signals, field devices and functional electrical interfaces. Unrestricted software programming, network engineering, protocol configuration, fire-alarm cause-and-effect design, access-control programming, mechanical design and manufacturer-level commissioning remain with the appropriate specialist. Safety circuits, fire-alarm functions and protective arrangements are not bypassed or altered outside an agreed specialist-controlled scope.
Prove the electrical interface. Coordinate specialist work with clear evidence.
Circuit supply available
Protection verified
Cable route and containment checked
Terminations sound
Relay and interface condition checked
Field signal verified
Functional response checked
Specialist boundary identified
Technical support process
Survey, define the agreed interfaces, install or alter, verify the electrical path, document and hand over.
- 01
Survey
Review the affected systems, available drawings, required interfaces and operational constraints.
- 02
Define the agreed interfaces
Confirm the electrical responsibilities, physical connection points and specialist boundaries.
- 03
Install or alter
Complete agreed containment, cabling, terminals, relays, devices and hardwired electrical interfaces.
- 04
Verify the electrical path
Check supplies, protection, signals, field devices and agreed functional response.
- 05
Document & hand over
Record completed electrical work, confirmed findings and specialist follow-on actions.
Technical support
Need electrical support connecting building systems?
Share the affected systems, required interfaces, drawings and operational constraints. ElectroLogic can review the agreed electrical integration scope and establish the next practical step.