Occupancy sensors
Mounting, power, wiring and functional checks for occupancy and presence devices.
Smart-Building & Energy Monitoring
Smart-Building & Energy Monitoring
Physical installation and electrical integration for commercial monitoring infrastructure, from field sensors and meters to gateways, panels and hardwired interfaces.
ElectroLogic installs, connects and verifies the electrical and physical device layer. Analytics platforms, cloud configuration, software programming and energy-consultancy services remain with the relevant technology or BMS provider.
Monitoring infrastructure
Reliable data starts with reliable physical infrastructure.
Occupancy, environmental and electricity-monitoring systems depend on correctly located devices, suitable supplies, dependable cable routes and clear field connections. A platform can only report what its sensors, meters and gateways are able to provide.
ElectroLogic supports the practical installation layer around smart-building and monitoring technology, coordinating with the relevant technology or BMS provider where configuration, analytics or platform access is required.
“Prove the device, supply and signal path before drawing conclusions from the data.”
Technical capabilities
Physical infrastructure for practical monitoring systems.
Environmental sensors
Installation and electrical connection of temperature, humidity and air-quality devices.
CO₂ monitoring
Mounting, supply, signal wiring and verification of CO₂ sensors.
Electricity meters & CTs
Monitoring-meter installation, current-transformer positioning and orientation, associated wiring, termination and identification.
Pulse & hardwired outputs
Connection and verification of pulse, status and other agreed hardwired outputs.
Gateways & connected devices
Physical installation, local power and associated wiring for gateways and network-connected equipment.
Power supplies & protection
Dedicated supplies, local protection, isolation and power-unit checks.
Control panels & field wiring
Panel connections, terminals, ELV and control cabling, containment and field-device termination.
BMS & energy-management interfaces
Agreed physical and hardwired connections to building-management or energy-management systems.
Equipment mounting & cable routes
Practical device locations, containment, cable routes and maintainable installation.
Fault diagnosis & functional checks
Device power, circuit, signal and connected-interface checks within the agreed electrical scope.
Labelling, documentation & coordination
Equipment identification, practical records and clear handover to the technology or BMS provider.
Monitoring fault diagnosis
Find the break in the physical device and signal path.
Missing or unreliable readings can originate in supply, protection, device installation, CT orientation, field wiring, gateway connection or an interface outside the electrical layer. Investigation establishes the condition of the physical path before software conclusions are made.
Verify the physical path before escalating the platform issue.
No local supply or operated protection
Incorrect or failed power unit
Loose, damaged or unidentified wiring
Incorrect meter or CT installation condition
Missing pulse or hardwired output
Sensor or gateway device condition
Broken field connection
BMS, energy-management or network interface requiring provider support
Platform, cloud or configuration condition requiring technology-provider access
- 1
Device & location
Confirm the device is correctly located, mounted and accessible for its intended function.
- 2
Supply & protection
Verify the local supply, isolation, protective device and power-unit condition.
- 3
Wiring & termination
Check cable routes, terminals, CT connections and field-device wiring.
- 4
Signal/output
Verify the relevant signal, pulse, status or hardwired output is present.
- 5
Interface verification & handover
Confirm the physical connection and provide findings to the technology or BMS provider.
Infrastructure & connected systems
Support the physical layer from field device to interface.
Electrical support is focused on the installation and verification layer: field sensing, metering, supplies, panels, wiring, containment and agreed hardwired connections to connected systems.
Field sensing
- Occupancy sensors
- Temperature sensors
- Humidity sensors
- Air-quality and CO₂ sensors
Electrical metering
- Electricity meters
- Current transformers
- Pulse outputs
- Associated supplies and protection
Panels & wiring
- Control panels
- Power units
- Protective devices
- Terminals
- Containment and cable routes
Interfaces
- Gateways
- Network-connected devices
- BMS hardwired connections
- Energy-management interfaces
- Agreed physical communications infrastructure
Operational building environments
Installation planned around an operating building.
Practical device placement
Device locations planned around occupied areas, access constraints and maintainable installation.
Controlled electrical work
Careful work around live distribution, metering and associated electrical infrastructure.
Provider coordination
Working with technology, BMS and network providers where configuration or platform access is required.
Clear scope boundaries
Identifying the electrical installation responsibility separately from platform configuration and analytics.
Electrical installation & platform boundary
Separate the physical reading path from the analytics platform.
ElectroLogic can establish whether the physical device, supply, meter, CT, wiring, pulse output or hardwired interface is present and operating as expected. Cloud configuration, analytics, dashboard design, software programming and interpretation of energy performance remain with the appropriate technology, BMS or energy specialist.
Prove the physical infrastructure. Escalate platform work with clear evidence.
Device installed
Supply available
Protection verified
CT orientation checked
Wiring terminated
Signal or pulse present
Gateway or hardwired interface connected
Provider handover completed
Technical support process
Survey, install and connect, verify supply and signal, coordinate configuration, document and hand over.
- 01
Survey
Review the device schedule, proposed locations, cable routes, supplies and required interfaces.
- 02
Install & connect
Mount equipment, provide agreed supplies and complete field wiring or hardwired connections.
- 03
Verify supply & signal
Check power, protection, termination, CT orientation and relevant physical outputs.
- 04
Coordinate configuration
Provide verified physical findings to the technology or BMS provider for their configuration work.
- 05
Document & hand over
Label equipment, record completed electrical work and identify any agreed next action.
Technical support
Planning smart-building or energy-monitoring infrastructure?
Share the device schedule, proposed locations, existing panels and required interfaces. ElectroLogic can review the physical electrical installation scope and establish the next practical step.